Product ID:14/5 DURA BOND
MSDS Date:05/08/1991
FSC:8040
NIIN:00N017561
MSDS Number: BLTBH

PRO CHEM INC

4420 BANKERS CIR
DORAVILLE, GA 30360
US

Emergency Phone: 404-449-4040

Info Phone: 404-449-4040

Cage: 0CPM5

PRO CHEM INC

ALPHARETTA, GA 30201 US

Telephone: 800-241-8180

Cage: 0CPM5

PHENOL, 2,4,6-TRIS(DIMETHYLAMINO METHYL)

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: 1.5%

EPOXY RESIN(DIGLYCIDLY ETHER OF BISPHENOL A)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 15%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POSIBLE SKIN AND EYE IRRITAITONS;
POSIBLE SENSITIZATION. AVOID EXCESSIVE SKIN CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE.

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH WITH
SOAP AND WATER IMMED AFTER USE. INHAL: REMOVE TO FRESH AIR. SUPPORT
BRTHG. (GIVE O*2/ARTF RESP) . INGEST: SEEK MD IMMED .

Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:DISPOSE IF IN NORMAL MANNER; NOT A POTENTIAL
POLLUTANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EYE CONTACT & EXCESSIVE SKIN
CONTACT.
Other Precautions:WASH WITH SOAP AND WATER IMMED AFTER USE.

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST TO ACCEPTABLE LIMITS.
Protective Gloves:POLYETHYLENE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NORMAL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:NIL
Vapor Pres:NIL
Spec Gravity:1.9
Evaporation Rate & Reference:NIL(BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:PUTTY-LIKE; MERCAPTAN ODOR.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:MIXING A LARGE MASS OF MATERIAL MAY
GENERATE EXCESSIVE HEAT.
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS, AND OXIDES OF
SULFUR AND NITROGEN.

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
ACCORDANCE WITH ALL FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.